Description
TITAN Lithium 12.8V 460Ah* Battery
*Real achievable capacity – up to 506Ah
12.8V | 460Ah | 5,888Wh
521mm long x 238mm wide x 218mm high
Our 460Ah is the leading 12V battery that packs the most energy into one case. With a real-world achievable capacity of 506Ah and the equivalent of 1,278Ah in lead acid, just one of these batteries can give you weeks of off-grid energy or many days of power without solar input when used as home storage.
We’ve included Bluetooth and heaters at no extra cost for round-the-clock accurate status reading, state-of-charge monitoring and perfect charging conditions, whatever the weather.
TITAN LiFePO4 batteries are inherently safe both chemically and thermally, and do not use rare materials like Cobalt or Nickel. In return, we get a slightly lower cell voltage of 3.2V per cell (4x cells = 12.8V), and a lower energy capacity compared to NMC (Lithium nickel manganese cobalt – the cells used in EVs), however LiFePO4 are much more stable at a chemical level, and have much higher lifespans – our batteries can last between 2,500 and 10,000 cycles (depending on use) – NMC is typically 1,000 to 2,500 cycles.
The omission of Cobalt vastly reduces the chance to start thermal runaway. Many now consider LiFePO4 to be safer than lead-acid thanks to their stability and internal control. They can be used in any orientation (e.g. on its side), although on its base will give the best performance. They contain absolutely no acid, generate no gas emissions and are recyclable.
TITAN batteries can be cycled (1 discharge + 1 charge = 1 cycle) between 2,500 to 10,000 times. The amount of cycles corresponds to how deep the discharge is – this is referred to as DOD; Depth of Discharge). If you discharge 100% of the capacity every time you use the battery, it can do this 2,500 times before needing to be replaced. The less capacity used, the higher the cycle life.
In terms of measurable life: if you discharged this battery 100% every day of the year – 2,500 cycles ÷ 365 days = 6.8 years expected lifespan
To put this into perspective, the highest quality lead-acid gel battery (gel has the best cycle count of lead-acid) can do 350-400 cycles at 80% DOD.
To get a similar capacity in lead-acid, you would need NINE massive, heavy 142Ah batteries (Exide ER650) in a parallel connection to make 1,278Ah. Just one TITAN 460Ah can save a huge amount of space, weight, extra wiring and has the added benefit of no gassing, so can be placed anywhere.
To compare accurately, we only use Wh (Watt Hour) capacity ratings – Ah (Amp Hour) ratings unfortunately do not take battery chemistry differences into account: TITAN lithium batteries use 100% of their capacity (~90% with Gel, ~75% AGM & ~60% traditional flooded lead-acid). This coupled with lithium’s inherent energy density, means our batteries have over double the useable capacity compared to lead-acid batteries.
Our most asked question – can lithium replace your current lead-acid battery? TITAN lithium batteries are designed as a direct replacement of lead-acid batteries with no need for new equipment. For more detailed information, please check out our FAQs
Our lithium batteries are for running equipment only (i.e. deep cycle use) – they are not designed for engine starting.
All TITAN lithium batteries use the highest quality lithium cells available. In doing so, we can achieve better performance, higher BMS thresholds and a better overall lifespan compared to others.
We use prismatic lithium cells (they look like a long, thin rectangle) rather than cylindrical cells. Prismatic cells are more expensive and harder to make than cylindrical, but the benefit is a higher quality, higher capacity and potent battery. As all battery cases are squares, our cells fill out all available space within which allows us to boast higher capacities over other brands that use cylindrical cells.
Cylindrical cells can waste a fair amount of internal space as circles put together will always have a gap, and are far harder to repair as they use a lot of spot welding in their design.
What about the cells getting too warm? When discharged at the full BMS allowance, we found all of our batteries to reach a maximum of ~45°C – well within the specification. For lithium to fail, the cell temperature needs to get to around 100°C. As our prismatic cells use aluminium for their outer case, any heat is dispersed with ease. And an added benefit is prismatic is a lot more efficient with heater options – heated options that use cylindrical cells means the internal cells that aren’t near the heater mat will not get sufficiently heated and can lead to early failure.
All TITAN batteries have their own BMS built-in. A Battery Management System (BMS) is a circuit board that is mounted on top of the internal cells inside the battery which is connected in between the cell terminals, and external battery terminals. The BMS controls and monitors everything with split second accuracy to ensure the battery cannot be damaged through normal day to day use. TITAN BMS currently has a market leading 11 protections built-in e.g. over discharge protection, over voltage, under voltage, temperature protection and short circuit protection to name a few.
All protections are temporary and are designed to self-reset or reset when the battery is put on a charger.
TITAN lithium’s BMS has one of the highest rated BMS allowances on the market thanks to the use of the best quality materials and internal workmanship.
This battery comes installed with an heater mat that surrounds the internal cells, which enables the internals to warm up in freezing conditions. All lithium batteries do not charge when below 0°C in order to protect the cells against damage that may occur – options with the heater installed will activate when the internal battery temperature is ~2°C or lower, and there is an incoming charge current to the battery. The heater is powered by the incoming charge from the charger, so there is no extra drain on the battery itself. The heater will then aim for 10°C, and will switch the incoming charge from the heater to the cells for the perfect charge, whatever the weather.
Battery warm up time will vary on the type of charger and the temperature, but on average, expect an added 20 minuets to your charge time.
The added heater does not affect performance in any way – the battery can and will be able to discharge in -20°C temperatures.
We recommend heated options to those who plan to use the battery in winter months, or will go to colder climates in autumn, winter and spring.
There is no one single lead-acid battery that can store 5,888Wh in capacity – to get near the same capacity using two lead-acid batteries would weigh a massive 210Kg (3x Exide AGM EP2100 *this does result in 6,300Wh – it’s the closest we could get), and would take over four times the physical footprint. A 170Kg weight saving means a huge difference when traveling abroad, as well as offering better MPG on vehicles.
Perfect as a drop-in replacement for lead-acid batteries, our high-performance copper terminals ensure the best electrical performance while inherently providing corrosion-free contact for those who use eyelet terminals. Two M8 bolts & spring washers are included with the battery.
Need round terminals instead? No problem – we can provide high-quality, hot stamped brass automotive adapters free of charge (just leave us a note at checkout).
Despite its high initial cost, TITAN lithium is cheaper than its lead-acid counter parts over its lifespan. Our design life is 10 years – rounded up this battery costs £1,400 or £140 a year. The closest capacity equivalent in lead-acid is three Exide AGM EP2100’s with a design life of 4 years – currently around £520 each or £390 a year (replacing the batteries at the 4 year mark). This equates to over £1,720 in savings over 10 years, plus all the benefits of a lighter and more efficient battery.
While the design life of TITAN Lithium is 10 years, we expect the average user to reach 15-20 years, making it an even better investment. The realistic average life of Lead-acid is 3-5 years.
Thanks to our 99% efficiency rating, TITAN batteries utilises incoming charge energy with little waste; making them a perfect partner for solar chargers. Our batteries can accept extremely high charging amps which means they can be charged extremely quickly – from 0% to 95% in less than 2 hours (when charged over 100Amps).
This efficient charging means TITAN batteries are also perfect for home solar storage (although we’d recommend looking at our higher voltage batteries for better BMS efficiency).
At TITAN, we are so confident in our build and component quality, we have upgraded all of our batteries that have grade A cells to our full warranty that lasts the lifetime of the battery. Our parent company celebrated its 75th anniversary of continuous business this year, and we plan to stick around for the foreseeable so you can rest easy that we will be here for any issues that may arise; be it tomorrow, or in 10 or even 30 years.
Important to note: like anything in life, the more you use something, the more it wears out – batteries have always been the same, and their capacity will degrade over time. This reduction is normal and to be expected; the harder you use the battery (i.e. you discharge it fully and charge it fully often), the faster its fully charged capacity will decrease. Lithium has an incredible resiliency to capacity reduction though, and we expect a capacity loss of about 5-10% every decade with normal use and charging within specifications e.g. a brand new 150Ah would have a fully charged capacity of 165Ah, a 10 year old 150Ah would have ~150Ah and a 20 year old 150Ah would have ~135Ah when fully charged.
Battery wear or capacity loss are not valid warranty claims. Once a battery reaches a fully charged point and it does not last very long or last as long as you need it to, you will need to replace the unit.
Our warranty covers all components against premature failures caused by manufacturing faults. For more information on our warranty terms, please click here
If anything does fail prematurely, we aim to repair or replace individual problem components rather than replace the whole battery. Doing this also allows us to reduce our carbon impact and reduce waste. As we are battery specialists (we used to make batteries in the 1950s), we are adept at any and all repairs should they arise – we do ask customers to leave the repairs to us; cells and BMS’s are proprietary in design.
Reviews
There are no reviews yet.