CTEK PRO60 | 12V 60A BATTERY SUPPORT CHARGER

The CTEK PRO 60 is an innovative and highly efficient 60A battery charger and power supply that’s designed to meet the demands of the diagnostic workshop.

£1,300.00incl. VAT

Description

PRO60 features a precision 60A power supply that delivers 12V battery support voltage with no flutter to prevent damage to the vehicle’s electronics and ECUs. It reacts extremely quickly to sudden power spikes so voltage and amperage are steady and accurate at all times, which is essential for diagnostic and reprogramming work. The output voltage is selectable in increments of 0.1V from 12.6V to 14.8V so it can be matched exactly to manufacturers’ minimum service specifications.

PRO60 also features a specially designed fanless cooling system to keep it at the perfect operating temperature in hot and cold conditions. This protects against ‘derating’, where the heat generated during use causes the output voltage to drop and the diagnostic process to fail. It also offers fully automatic, 8-step, ’auto adaptive’ charging that analyses lead-acid batteries and selects the optimal current. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)

Features:

  • Up to 60A of battery support
  • Power supply with selectable 0.1V increments from 12.6V to 14.8V
  • Silent, fanless cooling system
  • Suitable for all types of 12V batteries, including lithium iron phosphate
  • Adaptive (Auto) charging automatically analyses lead-acid batteries and selects the optimal current
  • Charger type: 8-step, fully automatic charging cycle
  • Multilingual, easy to read LCD display
  • Work with all 12V battery types, including Lithium* (LiFePO4)
  • 2V start up voltage for charging
  • Automatic parallel load compensation
  • No power derating
  • Extremely low ripple
  • Ambient operating temperature: -20˚C to +50˚C (- 4°F to +122°F)
  • Degree of protection: IP40
  • 2 year warranty
  • Optional trolley mounting and WALL HANGAR PRO mounting kit

Downloads:

Charging category AC charging
Input 220–240 VAC, 50–60 Hz, 4.6 A
Output 12 V,60 A
Power supply mode Max 60A, selectable 0.1V increments from 12.6V to 14.8V
Battery chemistry Lead acid; Lithium-ion
Charging Voltage Lead acid: 14.4V/15.8V/13.6V Lithium: 13.8V/14.4V/13.3V
Battery types 12 V:; WET; Ca/Ca; AGM; EFB; GEL; LiFePO₄
Battery capacity 10–1800 Ah, lead-acid battery types. 15–600 Ah, LiFePO₄.
Parallel Load Automatic
Back current drain* Corresponding to less than 2 Ah/month
Battery voltage 12 V
Ambient operating temperature -20 ˚C to +50 ˚C (- 4 °F to +122 °F)
Cooling Natural convection
Start voltage 2.0 V
Ripple** Less than 4 %
Temperature compensation Built in temperature sensor
Degree of protection IP40
Gross weight (unit in box) 10.1 kg
Dimensions (L x W x H) 227 x 216 x 284 mm
User interface LCD graphical display; Multilingual, easy to read
Net weight (unit with cables) 8.6 kg
USB Type B USB 2 port for updates and service.
Mains cable length 2.5m (AC cable) – detachable
Warranty 2 years
  • *) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
  • **) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.

60A battery support for the professional workshop

Designed to meet the demands of the busy professional workshop, the PRO60 battery support unit has an incremental voltage power supply (12.6V-14.8V) with fully automatic 8-step charging for precision control during diagnostic, service and repair work.

It reacts extremely quickly to sudden power spikes and its state of the art fanless cooling system means PRO60 can be used for long periods of time so fault finding and programming can be carried out safely and efficiently

 

Why you need CTEK battery support

Battery support during diagnostic, service and repair work demands a constant, reliable power supply to the vehicle – if the voltage dips, complex diagnostic programs could fail and might also damage the vehicle’s ECUs.

Like all CTEK PRO Series products, PRO60 has automatic parallel load compensation which makes sure that power supply voltage and amperage are always constant and correct, even if the battery has an additional load placed on it during diagnostic work.

The technologically advanced PRO60 gives technicians the confidence to carry out critical procedures without disruption, saving valuable time and money.

 

Precision 60A power supply
Delivers a constant, precise 12V support voltage with low ripple to prevent damage to the vehicle’s sensitive electronics.

PRO60 reacts extremely quickly to sudden power spikes so voltage and amperage are accurate and steady at all times, which is an essential requirement during diagnostic and programming work.

Selectable output voltages
Vehicle manufacturers and certain workshops can sometimes specify a minimum service voltage. In ‘POWER SUPPLY’ mode, the exact output voltage can be selected in increments of 0.1V, from 12.6V to 14.8V.

 

Fully automatic 8-step charging  
Easy to use, easy to read, multilingual LCD display for total control during charging. ‘AUTO ADAPTIVE’ mode automatically analyses lead-acid batteries and selects the optimal current.

Fanless cooling system  
Specially designed to keep PRO60 at the perfect operating temperature in hot or cold conditions. This protects against ‘derating’, a feature of conventional battery support units where the heat generated during use causes the output voltage to drop and the diagnostic process to fail.

Fanless cooling also protects the unit against damage from harmful dust so PRO60 can carry on working for long periods of time, even in the toughest conditions.

Tough, safe and reliable
Heavy duty 5m charging cables. IP40 rated, short circuit proof and comes with a 2-year warranty.

 

Reviews

There are no reviews yet.

Be the first to review “CTEK PRO60 | 12V 60A BATTERY SUPPORT CHARGER”

Your email address will not be published. Required fields are marked *

Our recommended alternative: